FunCycled - Interior Design, Kitchen Cabinet Painting, Furniture Repurposing in Upstate NY

Our good friend, Jo Ann,  (you will probably hear her name mentioned quite a bit) had this little hall table that was her grandmothers. It had a crack on one side and she wanted that fixed, to have us paint it a yellow color (we are all still debating on what color this actually is… lol), and then have us sand the edges to keep the antique look to the piece. Here’s our set by stop how to on refacing it.

Here are the before pictures…

We sprayed it with a first coat of primer. If you look at primers when you get to the store, you should always buy the kind that says no sanding required. It will save you a lot of time. We always use a water based primer and put it in our air painter that is hooked up to our air compressor. If you don’t have an air sprayer, you could buy spray primer and paint.

One little trick that John learned while working on the trim in the different mansions he worked on is that when you are fixing wood you can use Bondo instead of wood filler. He said it hardens much more quickly and keeps hardened better than wood filler. So, first we filled the crack with wood glue and clamped it down so that it would stay level (sorry I forgot to take a picture of that). Once it was dry, he put Bondo on the crack to level it with the rest of the wood.

This is the tricky part, you have to sand it by hand until the Bondo has the same shape as the wood’s edge. This took him quite a while and he used a regular piece of multi purpose sand paper.

Time to get our color on!

We painted it two times with Behr interior satin paint. Color TBD… lol!

After that was dry, John hand sanded most of the edges to expose the original wood and give it that antique look Jo Ann was looking for.

Then we sprayed with with a layer of Polyacrylic. This is is different from Polyurethane and it won’t leave a yellow tint in time (not to mention it doesn’t smell as bad).

Here’s the finished product! What do you think?? What color would you say it is?

My Aunt Alice gave us this rocking chair. I loved the style instantly, but it needed some work. Here’s step by step instructions on how we fixed it up.

The wood underneath the back of the chair had split so John cut a new piece, drilled new holes to screw back into the existing seat and reattach it.

Next, we took our paint air sprayer and sprayed the rocking chair twice with primer. This rocking chair has some rough spots from the paint, but we didn’t sand those out because we wanted to keep the “antique look”. We just primed over the paint without sanding. If you want a smooth surface, sand it first.

We waited a day for the primer to dry and then sprayed it with latex grey paint. We always look at the oops paint at Home Depot, Lowes or Sears and pick up whatever we think might look good. This was a $5 can that we liked and it only used about 1/3 of the small can.

Up Next, I added a crackled effect using brick red over the grey. It’s simple, you use Elmer’s Glue. Water it down a bit, paint it on the piece, wait a couple minutes until the glue is tacky, and then paint the next color. At first I didn’t think I was going to like it, but once it dried I fell in love!

Here’s the finished product!!